Packaging and Material Handling Equipment Solutions for EVERY INDUSTRY!

Home
New Equipment
By Model #
Used Equipment
Rollbags & Tubing
Parts & Service
Contact Us
Request Info
Terminology
Search BaggingGuys

T-275 Tabletop Advanced Poly-Bagger

The T-275 AUTOMATICALLY feeds and seals pre-formed, pre-opened bags on a roll and will allow you to achieve MUCH HIGHER packaging rates than you get with an impulse bar sealer!  Click HERE for DETAIL PHOTOS!

Digital controls for Auto (Paced Rate) or Manual (Foot-switch or Guard-Switch) cycle operation. Total Cycle Counter with Reset, Seal Time, Fill Time Delay and Seal Point. Set points are saved and automatically recalled when power is shut off.

For Tabletop PRINTING, Filling, Sealing capability, look at the T-375 Tabletop Bagger!

Features - Options - Specifications - Call for access to T-275 Video

- Click the following pictures for larger more detailed T-275 photos -

t-275_guard_trigger.jpg (129733 bytes)

 t-275_control_panel.jpg (114329 bytes) t-275_with_rolls.jpg (105797 bytes) t-275_paperloading.jpg (108962 bytes)
Safety Guard & Seal Bar Trigger Control Panel T-275 with Roll Bags Loading Process

Standard Features
bulletSolid, Constant Heat Seal Bar with Digital Temperature Controller
bulletPatented Teflon Shield increases Teflon Life Tenfold - Teflon only contacts the heater bar while sealing!
bullet"Guard Switch" Operation - Cycles the machine at the loading area to minimize operator movements, decrease operator fatigue and increase output
bulletPatented anti-jamming method detects seal obstructions and reverses seal bar.
bulletUniversal Adjustable Funnel Included
bulletAir Knife Quickly Opens Bag with Filtered Air
bulletAdjustable Support Provided for Heavier Products
bulletEasy threading - pull the bags off the roll and through the pinch rollers with no rollers to thread through

Options / Accessories
bulletFoam Compression Pad for Air Minimization
bulletCustom Electrical

T-275 Sealer Specifications
Bag Feed Method Automatic registration
Seal Mechanism Solid heater bar, continuous heat
Cycle Operation Automatic
Bag Size Range 2" x 2" up to 11" x 16"
Film Thickness 1 to 5 mil
Estimated Speed 10 to 25 bag/min.
Guard-switch Feature Standard
Auto/Paced Rate Operation Standard
Anti-Jam seal bar Standard Safety Feature
Dimensions 19-1/2" x 16" x 21-1/2"
Weight 60 lbs.
Pneumatic 0.5 cfm / 40 psi
Electric 110V / 60Hz / Single Phase

For less sophisticated table-top product bagging, see

our Model T-200 Advanced Poly Bagger!

For applications requiring even faster poly-bagging, see

our T-1000 Advanced Poly Bagger!!

Can't find what you think you need?  Drop us an E-mail describing your application or fill out

our Information Request form.  We'll call you back to let you know what's right for you.
Phone Us: Main Office (717-764-6103) or Philadelphia Sales Office (267-218-0698)

[Home] [Up]

 

Serving customers in Connecticut, Delaware, Maine, Maryland, Massachusetts,

New Hampshire, New Jersey, New York,  Pennsylvania, Rhode Island, Vermont,

Virginia, and Washington D.C.

Use webmaster@baggingguys.com to send us any feedback or comments about this site
 
Copyright © 1999-2008 • B Pack, Inc.
Last Updated: 03/06/2008