Troubleshooting Tips and Part # Information

Advanced Poly T-300 Tabletop Roll Bagger

Following are recommended tips for troubleshooting T-300 Tabletop Poly Bagger problems. You will also find a list of part numbers and descriptions for commonly used parts.

Preventative Maintenance & Proper Use Tips*

Area of Machine

Advice / Technique

How to I get the Footswitch to Work?

How to I get the Guard switch to Work?

(Applies to T-300 Tabletop Roll Bagger)

The T-300's seal cycle can be triggered either with a Foot Switch or via an integrated switch built into the bagger's safety guard - i.e. you press down on the guard after loading the bag to trigger the seal cycle.

As a safety feature, only one of these modes of triggering the seal cycle may be engaged at one time.

To set which mode (Foot Switch or Guard Switch) will trigger your seal cycle, follow these steps:

On the Touch Screen controller - From the Main Menu, choose the Technical Assistance option. You will be prompted for the maintenance password (Contact Us with your Serial Number if you do not know your password.) Key in the Password and press ENTER. Select the Factory Settings. At the bottom of the Factory Settings screen, you should see a blue button labeled either "GUARD" or "FOOTSWITCH". Press this button until your desired mode is showing. Save the settings and reboot the bagger.

General Machine Set-up:

(Applies to T-300 Tabletop Roll Bagger)

We will gladly try to talk you through proper set-up of your machine - Call us!

* Machine troubleshooting & repairs should only be attempted by a qualified mechanic or electrician. Power should always be disconnected prior to troubleshooting.

Please see your factory instruction manual for additional troubleshooting tips.

Common Replacement & Wear Parts

Parts for Advanced Poly T-300 Tabletop Roll Bag Machines
Part #	Description
Call with Serial #	Teflon Heater Bar Cover
Call with Serial #	Heating Element

Call Toll-Free with your T-300 Parts Order 1-800-785-6785