Constant Heat Tabletop Jaw Sealers
BaggingGuys offers a variety of simple, table-top jaw sealers for sealing your bags and pouches. These sealers utilize a constant-heat (the jaw heats up and stays hot) sealing process. The operator sets the desired seal temperature, inserts the bag top and closes the jaw to create a secure, air-tight seal.
Our simplest unit (the Manual Jaw Sealer) relies 100% on the operator to create the required foot-pedal pressure and dwell time to create a seal. The Motor Jaw and Robot Jaw Sealers add automated controls for more uniform seal pressure and dwell time control
Click the photos (below) for more information about each sealer.
Available for Polyethylene and Supported
Film heat sealing applications
Available for Polyethylene and Supported
Film heat sealing applications
Manual "Foot-pedal" Jaw Sealers
- Manual Jaw Sealer is Actuated by an Adjustable Foot Pedal
- Temperature Control for 220 to 550 F
- "Poly Jaw " Model designed for sealing Polyethylene Materials up to 8 mil thickness
- 15" and 19" Jaw Sizes Available (19" for PolyJaw, only)
-
"Thermo Sealer" Model designed for versatile sealing of
"supported" materials like:
- Cellophane
- Polypropylene
- Kraft & foil laminates
- MIL-spec materials
- Available in Flat (standard) or 30 Degree Incline Jaw Orientations
- Stainless Steel Finger Guards Mounted on Each Jaw
- Electrical: 115 V / 60 Hz / Single Phase
Motorized Jaw Sealers
- Semi-Automatic Jaw Sealer uses Motorized Jaws - Triggered with a Foot Switch
- Temperature Control for 200 to 500 F
- "Poly Sealer" model designed for sealing polyethylene materials
- "Thermo Sealer" model designed for versatile sealing of "supported" materials like:
- Cellophane
- Polypropylene
- Kraft & Foil Laminates
- Medical Pouches
- MIL-spec materials
- 15" Standard Jaw Width
- 1/8" and 3/8" Seal Widths Available
- Available in Flat (standard) or 30 Degree Incline Jaw Orientations
- Stainless Steel Finger Guards Mounted on Each Jaw
- Electrical: 115 V / 60 Hz / Single Phase
"Robot" Pneumatic Jaw Sealers
- Semi-Automatic Jaw Sealer uses Pneumatic Jaws - Triggered with a Foot Switch
- Digital Temperature Control up to 600F
- 0.001 to 9.999 Second Timer Allows Precise Control of Sealing Time
- Includes Pressure Control Regulator (Up to 100 PSI) and Dial Pressure Gauge
- Model RTP "Poly Sealer" model designed for sealing polyethylene materials
- Model R "Thermo Sealer" model for versatile sealing of "supported" materials like:
- Cellophane
- Polypropylene
- Kraft & Foil Laminates
- Medical Pouches
- MIL-spec materials
- 15" Sealing Jaw
- 3/8" & 1" Seal Widths Available
- Flat and Horizontal Crimp Sealing Jaws Available on Model "R"
- Optional Incline Jaw Orientations
- Stainless Steel Finger Guards Mounted on Each Jaw
- Machine Dimensions: 21" OAL x 12" OAD x 17" OAH
- Pneumatic: Requires Separate 30 to 100 PSI Air Supply
- Electrical: 115 V / 60 Hz / Single Phase