 | Surge Bin with Support Structure:
 | 304 SS Product Contact Surfaces |
| Structural Supports for Deaeration Bin and Baghouse |
| Equipped with load cells and controls for control of Pneumatic
Conveying System (from silos) |
| Catwalk with Side Rails, Diamond Plate Flooring, and Ladder |
|
| Slidell Model #3012 Bottom-Fill Automatic Baggers (two
available):
| Gross Weigh System with Bottom-fill, Vertical Auger Filler |
| Top-up Station with Total Bag Top Control |
| Servo Controlled Bag Lift with Bag Settler (eliminates product
free-fall) |
| Two-stage Filling (95% of Target on 1st Fill, Top Off for Final
Target Weight) |
| Quick Adjust Rear Bag Magazine for Multi-wall Bags |
| Programmable Allen-Bradley Touch-screen Operator Interface |
| Allen-Bradley 5/30 PLC with Telephone Modem for Remote Diagnostics |
| Bag Striker for "Square-up" of Bag Bottom and Tighter Fill |
| One Machine is Left-Right Feed, the other is Right to Left |
|
| Bag Closing Conveyors (Slidell Series 1121)
| Supports Bag Weight During Sealing Operation |
| 12" x 21' OAL Flat Belt for use with Slidell-Matic Automatic
Bagging Systems |
| Verta-lift Vertical Height Adjustment |
|
| Fischbein PBC-5600 Pinch Bag Closers
| Folds, Reheats Pre-applied Glue, and Securely Closes PBOM Bags |
| One Machine is Left-Right Feed, the other is Right to Left |
|
| Bag Kickers (Slidell Model #1900)
| Transfers Filled & Sealed Bags, 90-degrees from Vertical to
Horizontal |
| Attached to Slidell Series 1100 Bag Closing Conveyors |
|
| Power Curve Conveyor and Bag Transport Conveyors
| Accepts Bags from Bag Kickers |
| Turns Bags 90-degrees to the Right |
|
| Bag Flattening Conveyor (Slidell Series 1550)
| 20" Wide Belt x 13' OAL with 7'-10" Discharge |
| 12.5' OAL Top Boom Section with Triple Air Bag Pressure Control |
| Includes 3' OAL Slave Infeed Conveyor (12" TOB) |
|
| Safeline Metal Detector |
| Automatic Checkweigh System
| Five Zone Microprocessor Controls and System Diagnositics |
|
| Glue Applicator
| Automatically applies Glue to Bag Prior to Palletizing for Pallet
Stability |
|
| Slidell SDP Model #2020 Automatic Bag Palletizer
| Unitized Frame with Single-point Electrical and Pneumatic Hook-up |
| Rotary Actuators Eliminate Linear Bearings and Tracks |
| Pallet Dispenser and Empty Pallet Magazine |
| Powered Belt Surge Conveyor for Bag Reject Accumulation and Pacing |
| Integral Checkweigher |
| Split-load Stripper Plates for Transfer of Bags to Pallet |
| Allen-Bradley Panel-view Touchscreen Control Panel (amber) |
| Product Code Storage for Recall of Previous Settings |
| Telephone Modem for Remote Diagnostics |
| Includes Slip Sheet Dispenser |
| Integrated with Slidell-matic for Integrated Operation of Entire
Line |
| Stairs, Ladder, and Access Platforms |
|
| Pallet Accumulation Conveyor
| Accumulates Finished Pallets |
| Includes Pallet Separation Brake for Easy Pick-up of Last Pallet |
|
