BaggingGuys.com Header Logo
Packaging  and  Material  Handling  Equipment  for  EVERY  INDUSTRY!

 - SOLD -  Pre-owned T-200 Tabletop Advanced Poly Bagger

Our pre-owned, Advanced Poly Packaging Model T-200 tabletop bagger has been sold.  BaggingGuys does offer the T-200 available new, as well.  Click here for details about a new T-200!

This unit was built in 2007 and was used for less than 3,000 cycles in an office environment for bagging literature into poly bags.

This bagger is designed for use with pre-made bags on a roll and is ideal for bagging hardware, parts kits, beads, bakery products, buttons, electronic parts, food items, printed materials, etc.

Used T-200 Tabletop Roll Bagger Photo

Detailed Photos - Model T-200 (Serial# 207030111)

 

Machine Features

  • 2007 Machine – Used Less Than 3,000 cycles for Loading Literature into Poly Bags
  • Uses Advanced Poly-Bags™ (Pre-opened bags on rolls)
  • Bag Sizes: 2” x 2” to 11” x 16”, 1 mil to 5 mil Thickness
  • 1/16” Wide Seal x 11” Seal Length (Maximum Bag Width)
  • Cycle Count with Reset Button
  • Universal Adjustable Parts Chute to Assist with Product Feeding (2.5” Standard Pass-through)
  • Adjustable Product Support Shelf Supports Bag and Helps Operator Position Seal
  • Includes Heat & Cool Dwell Time Controls with LED Indicators
  • Digital Temperature Controller
  • Air Knife with Flow Controls for Bag Opening
  • Designed for Easy Bag Threading and Quick Roll Changes
  • 1” Diameter Bag Roll Shaft with Chucks
  • Teflon® Seal Bar Cover with Teflon® Shield™ to Increase Teflon® Life
  • Patented Anti-Jam Device Prevents Seal Bar from Closing Obstructions in Seal Area
  • Rated for 4-6 bags-per-minute (Dependent on bag size, product being filled, & operator ability)
  • Dimensions: 20” Wide x 14” Long x 21” High
  • Shipping Weight – Approximately 80 pounds
  • Pneumatic:  40 PSI Compressed Air Required
  • Electrical: 110 V / 60 Hz / Single Phase
  • Made in USA

Options / Accessories (New)

  • Foam Compression Pad for Air Minimization
  • Customer Partition Table (Sits Above Bagger to Hold Parts for Kit Packaging)
  • Tabletop Bagger Cart (Includes Extra Roll Hangers, Work Shelf, and Storage Shelves)

Machine Specifications

Minimum Bag Size
2" OAW x 2" OAL
Maximum Bag Size
11" OAW x 16" OAL
Bag Style
Pre-made "Bag-on-a-Roll"
Bag Materials
Polyethylene, Polypropylene
Seal Area
11" x 1/8" WIde
Maximum Product Pass-Through
2.5"
Dimensions
20" OAW x 14" OAD x 21" OAH
Weight
Approx. 80 Pounds
Pneumatic
40 PSI Compression Air Req'd
Electrical
110 V / 60 Hz / Single Phase