5505 Auger Packer (for valve bags)

The 5505 Auger Packer uses a horizontal auger to fill valve style bags by screw feeding granular, pelleted, dry, and fine powdered materials through a valve opening in the top of the bag.

OPERATION: Operator places empty bag on filling spout and initiates filling cycle. Auger feeds at high speed to "bulk" fill bag. As weigh in bag approaches target weight, auger slows down and "dribbles" material into the bag until the target weight is reached. Operator removes filled bag.

The 5505 can be used in single or dual-spout configurations - with manual of fully-automatic bag hanging!

Standard Features

Rugged Steel Stand with Manual Bag Discharge Saddle
Fill Spout with 1100 RPM Single Speed Auger
Reversing Mild Steel Auger Prevents Product Dribble
Cross Flex Beam Scale Pivots Have No Wear Points
Feed Hopper Equipped with Pin Style Agitator
Clean-out Ports on Both Sides of Feed Hopper
2", 2.5", 3", or 3.25" OD Filling Spout (select one)
3 HP TEFC Motor
Made in the USA

Options / Accessories

Casters for Portability
Digital Electronic Weigh System with Direct Mount Load Cell
Automatic Start with Pneumatic Bag Discharge
Pneumatic Bag Clamp
Stainless Steel Product Contact Parts
Downturn Spout and Platform for Carton & Drum Filling
Open-mouth Bag Filling Attachments
850 RPM or 1380 RPM Auger Speed
5 HP Motor for Heavy Products

Scale Specifications

Material Type	Granular, Pellet, or Powder
Feed Method	Horizontal Auger
Spout Size	3" to 6"
Bag Length	16" to 36"
Weighment Range	25 to 110 Pounds
Accuracy**	+/- 1 to 4 oz
Speed (Maximum)**	5 BPM
Overall Width	28"
Overall Depth	60.7"
Overall Height	51.3"
Machine Weight	Approx. 1000 lbs (454 kg)
Pneumatic	0.15 CFM @ 80 PSI
Electrical (NEMA 12 Standard)	230 V / 60 Hz / 3 Phase

* formerly Bemis Packaging Machinery Company

** Accuracy and Speeds vary with Product Characteristics (Call for a product evaluation)